MICROTRENCHING

What is Micro-Trenching?

Micro-Trenching is a fast, efficient and cost-effective process of creating a trench in the groundwork of an existing hard surface for the installation of cables / ducts which allow premises to be connected to the main fibre network.

The advantages of microtrenching are:

  • Much cheaper to install than conventional methods
  • Laying the cable is much quicker
  • Typically the road surface can be operational on the same day
  • Substantial reduction in disruption to road users
  • Environmentally friendly procedure

What does the process involve?

Micro-Trenching involves using specialist equipment to cut small trenches along the street, often as thin as 20mm wide and 80mm deep, with a road saw using diamond blades. Microduct is then installed into the shallow trench and fibre pushed through to the premises. The whole trench is quickly sealed and the deployment is complete. This minimises disruption and cost without impacting on the quality of the duct installation.

Why use Micro-Trenching?

Conventional trenching is slow, damaging to highways and disruptive. Digging up roads and pavements to install new networks of any sort is never popular. Local residents dislike the disruption and the noise, while councils have to deal with increased congestion on busy roads, particularly if works overrun.

Installers therefore aim to get the job done as quickly as possible to minimise disruption and costs.

Unlike conventional methods, Micro-Trenching is an environmentally friendly procedure that is cost efficient, fast, incurs minimal inconvenience to the community, and produces aesthetically pleasing end results.

Micro-Trenching Machines

Red Band have a range of Altrad Belle products that can be used in the process of Micro-Trenching.

Duo350X Twin Blade Saw

Altrad Belle Duo 350X Twin Blade Floor Saw | Red Band UK

Twin bladed microtrenching floor saw to reduce the time is takes to cut-out the trench. This saw creates two cuts simultaneously which ensures an even width along the length of the trench.

RTX60M Trench Rammer with Extension Foot

Altrad Belle RTX60M Microtrenching Rammer | Red Band UK

Strong and durable microtrenching rammer with choice of 80mm or 100mm wide extension feet specifically designed for micro-trenching. This 4-stroke trench rammer has high level compaction for use on cohesive materials and gradients.

Microtrenching Package | Red Band

See our microtrenching package which includes the Duo 350X floor saw and RTX60M rammer at a discounted price when you buy together.

BHB25XS Low HAV Hydraulic Road Breaker

MICROTRENCHING

Low-vib hydraulic breaker with ultra-dampened head which reduces the HAV Levels whilst still offering a high breakout force. A range of breaker steels can reach into microtrenches to penetrate below the road surface.

Bulldog 20-140 Hydraulic Power Pack

Altrad Belle Bulldog Power Pack | Red Band UK

Compact and portable hydraulic power pack with built-in Power On Demand system. Ideal power source for the Altrad Belle BHB 25XS Hydraulic Breaker.

PCLX320 Streetworks Plate Compactor

MICROTRENCHING

HAUC approved forward plate compactor with 320mm wide Dual Force baseplate for ‘Streetworks’ applications. Available as part of the highly popular PCLX Plate Compactor range from Altrad Belle.