| MPN | 5019592-45 | 5019592-52 | 5019592-56 |
| Compatible Models | T435, 327P4, 327P5X, 525P4S | 235, 236, 240, 236e, 240e, 120, 130, 135, 140, 340i | 420EL, 321EL |
| Bar Length (inch) | 12″ | 14″ | 16″ |
| Bar Length (cm) | 30cm | 35cm | 40cm |
| Chain Pitch | 3/8″ mini | 3/8″ mini | 3/8″ mini |
| Gauge | 1.3mm | 1.3mm | 1.3mm |
| Bar Type | Laminated | Laminated | Laminated |
| Nose Type | Sprocket Nose | Sprocket Nose | Sprocket Nose |
| Bar Mount Type | HSM | HSM | HSM |
Husqvarna Laminated Bar 3/8″ Mini 1.3mm (10-16”)
Husqvarna Laminated Bar 3/8″ Mini 1.3mm (10-16”)
From £22.49
From £18.74 Exc. VAT
In stock
The Husqvarna 3/8” Mini small bar mount is a thin gauge laminated guide bar with a gentle curve and a small nose radius to reduce the risk of kickback and to facilitate good cutting control.
This classic laminated bar is also epoxy coated to provide protection against both scratches and corrosion too.
To use 
, please spend more than £50
Should you require clarification on a product before ordering or assistance post ordering, please do not hesitate to contact our sales & support team on 0116 260 2601 (+44 116 260 2601 outside the UK) between 8:30AM and 5.00PM Monday to Friday (excluding Bank and Public Holidays), or via email; [email protected]. Alternatively you can fill out the contact form on our contact us page.
If you have question regarding cancellation, returns or damages please refer to our Delivery & Returns page or again contact us to clarify.
If your query is related to the warranty or repair of a product, again please contact us to discuss your issue or refer to our Service & Repair page.
Related products
