Husqvarna PG 280 11” Floor Grinder & Edger - 110V
The Husqvarna PG280 is a compact, highly versatile and easy to use combination surface preparation tool - two in one floor grinder and surface edger.
This single disc floor grinder and polisher with a working width of 280mm can quickly convert for edge grinding on both sides for maximum versatility from the added convenience and comfort of an upright working position. This can save hours of back breaking work hand polishing typically conducted using a separate handheld device at ground level.
It is ideally suited for use on small to medium sized surfaces where an applied coating needs to be removed (such as paint, adhesives, epoxy, spackle etc) or concrete high spots need to be evened out.
The PG280 is supplied with a single multi-tool holder to which a comprehensive range of Husqvarna Redi-Lock® single and double diamond grinding blocks can quickly and easily be attached to. The innovative Redi-Lock® system is as ingenious and it is simplistic in design, enabling blocks to simply to be tapped in and out of position; no more trying to change grinding plates mid-job. A fast, simple and completely tool-less operation.
This lightweight , compact, efficient and easy to use machine has been thoughtfully designed to facilitate a comfortable and ergonomic work position. Its ingenious design with its folded frame, dividable parts and removable motor also allows easy transport and storage when the job is done (can fit in the boot of a small car).
PG 280 (110V electric) - 1.1kW (1ph). Single head. 280mm working width. 72kg.
Minimum 16A, 2.5kVA continuous or 5kVA intermittent supply. See our transformer guide for more info.
RRP from £3,466.80 Inc. VAT
|MPN||970 49 46-03|
|Power Supply||16 Amp|
|Dimensions (W x H x L)||420 x 990 x 1320mm|
|Our Price (Exc. VAT)||£1,990.00|
See our transformers guide for more info.
Not only is the PG280 effectively two high performing surface preparations tools in one, it also delivers performance not replicable by the use of hand tools alone, all from a more convenient, comfortable, productive and conducive standing working position.
It can be easily connected to a variety of compatible dust extractors for effective dust management. The vacuum port of the PG280 combined with its self-adjusting brush edged dust guard/cover, limit the dust generated from entering into the working environment. The use of a suitable dust extractor is strongly recommended.
The PG280 has an easily lid covers and wheel settings which enables quick conversion to edge grinding on both sides, which is also possible without the use of tools.
It is a simply and very user-friendly machine with fixed speed, so no additional speed settings or controls are required for added simplicity. The machine also has a user-friendly logical control panel and is equipped with overload protection for added safety.
The Husqvarna range of Redi-Lock® grinding blocks are available in a variety of grit sizes to suit individual needs and desired finish. They are also available in single and double row segments to suit both budget and performance requirements. They are incredibly simple, quick and easy to fit; the swift strike of a hammer is all that is required to located a grinding block in place and other to remove it, no time wasted on site trying to change over replacement grinding disc assemblies.