Search Diamond Blades

Red Band BSD45-E 14-18″ Masonry Saw – Electric

Red Band BSD45-E 14-18″ Masonry Saw – Electric

£3,186.00
£2,655.00
RRP £4,248.00 Inc. VAT

In stock

The BSD45-E is a strong, precise and easy to use electrically-powered masonry with a 18”/450mm blade capacity, a maximum 6.5”/165mm depth of cut and a generous 20”/500mm maximum cutting length. It is ideally suited for a wide variety of cutting applications and the wet or dry cutting of small masonry materials, concrete products, natural stones and refractories etc.

The BSD45 (Brick Saw Deluxe 450mm) was specifically designed to provide a masonry saw which was not only efficient and easy to use, but also easier and more cost effective to maintain and operate too; without compromising its user-friendliness, cutting accuracy or performance. It can also be used with smaller 14”/350mm diameter blades, although the maximum depth of cut if doing so will reduce to 5”/125mm.

This high-specification and high-performance masonry saw is equipped with winding handle and foot pedal depth control which provides the operator the flexibility of either fixed or step cutting materials, together with an integral recirculating electric water pump for wet cutting and a convenient SG material Safety Gripper for improved operator safety.

The BSD45-E is available with a choice of 110V, 230V or 415V electric motors. They are ideal for site and indoor use, as well as use in more noise-sensitive and poorly ventilated areas too. It is also available with a Honda petrol engine (BSD35-P), which makes it more fully self-contained and therefore ideally suited for use on virgin sites and in remote locations with no access to a suitable electrical power supply, as well as other well-ventilated areas.

The 110V BSD45-E is most commonly used for construction site use, whilst the 230V and 415V models more commonly used for fixed industrial applications (please note that the 230V model requires hard-wiring to a 16A supply. It cannot be used with a 3-pin plug or 13A domestic supply). The 415V BSD45-E is most commonly used for more continuous use in industrial applications.


BSD45-E (110V 1ph) – (3.0Hp/2.2Kw). Blade capacity 350/450mm. Max depth of cut 125/165mm. 165kg.

Minimum 32A, 10kVA continuous supplySee our transformer guide for more info.

BSD45-E (230V 1ph) – (3.0Hp/2.2Kw). Blade capacity 350/450mm. Max depth of cut 125/165mm. 165kg. 16A direct supply.

BSD45-E (415V 3ph) – (5.5Hp/4.0Kw). Blade capacity 350/450mm. Max depth of cut 125/165mm. 165kg. 32A 3-phase supply.

Choose an Option
BSD45 14-18" - 110v
£3,186.00
£2,655.00 Exc. VAT
RRP £4,248.00 Inc. VAT
Qty:-
+
BSD45 14-18" - 230v
£3,186.00
£2,655.00 Exc. VAT
RRP £4,248.00 Inc. VAT
Qty:-
+
BSD45 14-18" - 415v
£3,186.00
£2,655.00 Exc. VAT
RRP £4,248.00 Inc. VAT
Qty:-
+
Add a Hard Natural Stone Diamond Blade?
Qty:-+
Add a Concrete Diamond Blade?
Qty:-+
Add a Multi-Material Diamond Blade?
Qty:-+
Add Tilting Table
Tilting Table for Masonry Saws
Tilting Table for BSD / CM501 / CM601
£780.00
£650.00 Exc. VAT
RRP £4,248.00 Inc. VAT
Qty:-
+

(Delivery calculated at checkout)

SKU: BSD45-E
Share:

The BSD45-E has been built around tried, tested and proven concepts and constructed from high grade, quality materials and components to ensure efficient service and longevity.

A key consideration in the design of the BSD45-E was its ease of service and low cost of maintenance; the aim being to produce a high-performance saw which used more affordable parts and was easier and quicker to maintain, with less moving wear-parts – without compromising functionality its cutting performance or cutting accuracy.

The BSD45-E has a strong and rigid construction and a standalone frame design. It can be used with 14”/350mm and 18”/450mm diameter blades alike, although is more ideally suited and set-up for use with 18”/450mm diameter blades.

BSD45-E 110V BSD45-E 230V BSD45-E 415V
MPN BSD45-E-110 BSD45-E-230 BSD45-E-415
Motor Power 3.0Hp/2.0kW 3.0Hp/2.0kW 5.5Hp/4.0kW
Voltage 110V Electric 230V Electric 415V Electric
Fuse 32A (1-phase) 16A (1-phase) 16A (3-phase)
Minimum Transformer 10kVA Continuous* N/A N/A
Blade Capacity 350/450mm 350/450mm 350/450mm
Bore Size 25.4mm/1″ 25.4mm/1″ 25.4mm/1″
Maximum Cutting Depth 125/165mm 125/165mm 125/165mm
Maximum Cutting Length 500mm 500mm 500mm
Maximum Material Height 355mm 355mm 355mm
Table Size (W x L) 580 x 420mm 580 x 420mm 580 x 420mm
Overall Dimensions (L x W x H) 1480 x 610 x 1480mm 1480 x 610 x 1480mm 1480 x 610 x 1480mm
Weight 165kg 165kg 165kg

Help Info

We endeavour to despatch orders within 1 to 5 working days from receipt of order, subject to the time of order placement and the day an order is received (i.e weekday or weekend, public holiday etc). If a product is temporarily out of stock and cannot be delivered within 10 days, we will notify you of the delay and provide you with the opportunity to wait for goods to be received in or cancel your order and have monies paid for outstanding items refunded to you in full. We reserve the right to deliver an order in instalments by separate delivery shipments.

If you are concerned about the stock position of an item(s), require goods on a time sensitive basis and wish to upgrade the associated delivery to a timed service (i.e pre-10:30AM, pre-12PM, Saturday AM), or wish to arrange delivery outside of the UK, please contact our Sales and Support team who will gladly assist you.

Our Sales & Support team are available on 0116 260 2601 (+44 116 260 2601 outside the UK) between 8:30AM and 5.00PM Monday to Friday (excluding Bank and Public Holidays), or can be contacted via email; [email protected]

Customers also bought

Quick view

Tilting Table for Masonry Saws

From £780.00
From £650.00 Exc. VAT

Search for products

Back to Top